- SKU: 48457
- Manufactured by: Harman
- Manufacturers Part No. : XLS 1000
Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.
Features & Specifications:
- Model: XLS 1000
- Stereo, 2 ohms (per ch.) 550W
- Stereo, 4 ohms (per ch.) 350W
- Stereo, 8 ohms (per ch.) 215W
- Bridge-Mono, 8 ohms 700W
- Bridge-Mono, 4 ohms 1100W
- Sensitivity (for full rated power at 4 ohms)
- 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz - 20 kHz)
- +0 dB, –1 dB
- Signal-to-Noise Ratio
- Rated as dBr to full rated 8Ω power output (A-Weighted):
- XLS1000 > 97 dB
- XLS1500, XLS2000, XLS2500 > 103 dB
- Damping Factor (8 ohm): 10 Hz to 400 Hz
- > 200
- Crosstalk (below rated 8Ω power)
- At 1kHz: > 85dB
- At 20kHz: >55dB
- Input Impedance (nominal)
- 20 kΩ balanced, 10 kΩ unbalanced
- Load Impedance
- 2 to 8 Ω per channel in Stereo
- 4 to 8 Ω in Bridge Mono
- AC Line Voltage and Frequency Configurations Available (± 10%)
- 120 VAC 60 Hz
- 100 VAC 50/60 Hz
- 220 and 240 VAC 50 Hz
- Ventilation
- Flow-through ventilation from front to back
- Cooling
- Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
- Air Volume Requirements (per minute per unit)
- 80.15 ft³ (2.27 m³)
- Integrated Processing
- PureBand™ Crossover System
- Crossover Filter: Linkwitz-Riley 24dB per Octave
- Crossover Frequency Range: 50 HZ - 3 kHz
- Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
- Peakx™ limiters: Channel independent clip limiter designed to
- provide maximum output while protecting your loudspeakers
- Input/Output
- Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
- Output Connectors: Two 4-Pole Speakon® Output Connectors
- accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector.
- One pair of back-panel binding posts per channel; accepts
- banana plugs or bare wire. (European models do not accept
- banana plugs.)
- XLS1000: 8.12-Inch (20.62cm) depth
- Rack mount width: EIA Standard 19-inch (48.3-cm)
- Height: (EIA RS-310-B), 3.5-inch (8.9-cm)
- Depth: XLS 1000: 7.7-inch (19.6-cm)
- Net Weight/Shipping Weight: XLS1000: 8.6 lb (3.9kg)/13.6 lb (6.2 kg)
