- SKU: 31266
- Manufactured by: JBL
- Manufacturers Part No. : EON315
The EON315 is a 15-inch, two-way, powered, portable speaker system. It is a complete self-contained sound reinforcement system, capable of full-bandwidth reproduction at high levels with the added benefit of a microphone pre-amp enabling the direct connection of a dynamic microphone. The EON315 is comprised of a 380 mm (15 in) JBL woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and system EQ functionality.
Specifications:
- System Type: Self powered 15", two-way, bass-reflex design
- Frequency Range (-10 dB): 38 Hz - 20 kHz (EQ in ‘Flat’ position)
- Frequency Response (±3 dB): 50 Hz - 18 kHz (EQ in ‘Flat’ position)
- Coverage Pattern: 100° H x 60° V nominal
- Directivity Index (DI): 9 dB
- Directivity Factor (Q): 8
- Crossover Frequency: 1.8 kHz
- System Power Rating: 280 W continuous, 560 W peak
- LF Power amp: 220 W continuous at driver impedance
- HF Power amp: 60 W continuous at driver impedance
- Distortion: Less than 0.1% at rated power
- Maximum SPL: 127 dB
- Signal indicators: Limit: Red LED indicates input overload condition
- Signal: Green LED indicates signal present
- Mic/Line: Red LED indicator
- Input Gain: Mic position: -Infinity to +40 dB
- Line position: -Infinity to +4 dB (+20 dBu Max signal input)
- Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
- Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
- HF +2.5 dB Shelving Filter @ 4 kHz
- Low Cut Filter: Pre-set high pass @ 120 Hz
- LF Driver: 1 x M115-2 380 mm (15 in)
- HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) polymer diaphragm, neodymium compression driver
- Input connector: Balanced XLR / ¼ inch TRS combo jack.
- Output connector: Balanced male XLR, +20 dBu (peak) o/p level
- XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
- Limiting/Protection: Dynamic Limiter
- Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
- Handles: One left/right side, one on top
- Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension points, 1 x M10 pull-back point.
- Grille: Powder coated perforated steel with acoustically transparent black screen backing.
- AC input: 120 – 240 V, 50/60 Hz
- Dimensions (H x W x D): 685 mm x 438 mm x 366 mm (27 in x 17.3 in x 14.4 in)
- Net Weight: 15.9 kg (35 lb)
